Page Comparison

Tip

Nano live 3D cell explorer is holo-tomographic microscopy that measures the quantitative refractive index of cell organelles.

You can image live cells in 3D without stains, fixation, or phototoxicity.

The system is equipped with an environmental control unit that controls the temperature and CO₂ content inside the imaging chamber and enables visualization of label-free unstained 3D cells.

Nano live web sitewebsite

Resolution	Δx,y = 200nm; Δz = 400nm
Field of View	85 x 85 x 30 μm
Tomography frame rate	0.5 fps 3D image rate with full self-adjustment
Microscope Objective	Air with 60x magnification

Frequently Asked Questions:

How to save and access my data?

Save the data in:

→ open the driver data (D :) “Data_Bioimg”

→ open folder with your Weizmann user name

→ open a new folder with the date (crucial)

→ save the data (characters like ~!@#$%^&*()`;’:<>,/?[]{} are not allowed, and files including them are not copied)

Once you are done, the computer will synchronize the correctly saved data to the “bioimg” server.

To see the data on your PC, follow the instructions in this link: BioImg Storage Server system.

**When starting to work with the Bioimaging system for the first time, please make sure you have a UNIX ID added to your WIS ID (you can check it with your unit administrator)

How can I visualize the data on my pc?

You can work on one of our Image Analysis Software and Workstations

Info

How do I start?

Turn ON the computer.
Remove the cover from the microscope.
Turn ON the microscope.
Image Added
If needed: turn on the temperature control panel, pump, and CO₂.
Image Added
Image Added
Image Added
If the temperature is working, fill the baths with DDW.
Enter “STEVE” software.
Place your sample in the microscope.
Start imaging.
Save the data in data (D :) “Data_Bioimg.”
→ open folder with your Weizmann user name
→ open a new folder with the date
→ save the data
Turn OFF the software (leave the computer on).
Turn OFF the microscope , and the temperature control

...

.

Versions Compared

Old Version 8

New Version 9

Key

Frequently Asked Questions:

**When starting to work with the Bioimaging system for the first time, please make sure you have a UNIX ID added to your WIS ID (you can check it with your unit administrator)